-- *****************************************************************************
-- Juniper-IKE-CONF
--
-- JUNOSe SNMP Agent Capabilities definitions for the IKE MIB.
--
-- Copyright (c) 2003, 2004 Juniper Networks, Inc. All rights reserved.
-- *****************************************************************************Juniper-IKE-CONF DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITYFROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
juniAgents
FROM Juniper-Agents;
juniIkeAgent MODULE-IDENTITYLAST-UPDATED"200401231521Z"-- 23-Jan-04 10:21 AM ESTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"DESCRIPTION"The agent capabilities definitions for the Internet Key Exchange (IKE)
component of the SNMP agent in the Juniper E-series family of products."-- Revision HistoryREVISION"200401231521Z"-- 23-Jan-04 10:21 AM EST - JUNOSe 6.0DESCRIPTION"Replaced the juniIkeSaTable with the juniIkeSa2Table."REVISION"200310232017Z"-- 23-Oct-03 04:17 PM EDT - JUNOSe 5.3DESCRIPTION"The initial release of this management information module."
::={ juniAgents 66}-- *****************************************************************************
-- IKE JUNOSe SNMP Agent Capabilities definitions
-- *****************************************************************************juniIkeAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the IKE component of the JUNOSe SNMP agent. This version
of the IKE component was supported in JUNOSe 5.3 system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the JUNOSe SNMP agent for the IKE application in
JUNOSe. These capabilities became obsolete when the juniIkeSa2Table
replaced the juniIkeSaTable."SUPPORTS Juniper-IKE-MIB
INCLUDES{
juniIkePolicyRuleGroup,
juniIkeIpv4PreSharedKeyGroup,
juniIkeFqdnPreSharedKeyGroup,
juniIkeSaGroup }
::={ juniIkeAgent 1}juniIkeAgentV2 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 2 of the IKE component of the JUNOSe SNMP agent. This version
of the IKE component is supported in JUNOSe 6.0 and subsequent system
releases."STATUScurrentDESCRIPTION"The MIB supported by the JUNOSe SNMP agent for the IKE application."SUPPORTS Juniper-IKE-MIB
INCLUDES{
juniIkePolicyRuleGroup,
juniIkeIpv4PreSharedKeyGroup,
juniIkeFqdnPreSharedKeyGroup,
juniIkeSa2Group }::={ juniIkeAgent 2}END